VEHICLE CONTROL
Elinta Motors HCU is designed for both pure EV and Plug-In hybrid applications.
4x CAN-bus it controls powertrain, vehicle safety sys-tems, dashboard, climate control an other in vehicle equipment operation.
4x CAN Bus
12x Digital inputs
6x analogue inputs
17x outputs
Power Supply 9V to 18V, operating temperature -40 C to +85 C
Technical data
 |
Key Features |
| 4 x CAN-bus, up to 1Mbps | |
| 18 x inputs | |
| 17 x outputs | |
|
Dual STM microprocessors |
|
| IP6k9k protection | |
| Integrated IEC 62196 charging controller | |
| Smart diagnostics | |
| CAN-USB programming | |
|
Climate control |
|
|
Vehicle safety: ABS, VSC, ASR, LDWS |
| Master Unit | Other Features | Inputs | Outputs |
| Typical working voltage: 12 V to 18 V | Operating range -40 C to +85 C | 8 x Protected digital inputs | 13 x N type outputs 1.4 A |
|
Minimum voltage: 6 V |
4x CAN-bus, up to 1 Mbps | 4 x Protected analog inputs | 4 x N type outputs 10.0 A |
| Normal operation current: > 500 mA | RS232 - up to 11520 baud | 12 V Internal battery voltage monitor | 2 x P type outputs up to 1.8 A |
| Peak current: 50 A | 7" or 10" GUI support | 2 x Fully isolated accelerator signal inputs | Current Limitation (all outputs) |
| Standby current: <10 mA | 90 pin connector | 1 x Fully isolated brake position signal input | Overload Protection (all outputs) |
| 3 x Current monitoring inputs up to 20 A | Thermal Shutdown (all outputs) | ||
|
Ignition input for system enable |
|
